Page 581 - Iscar
P. 581
SCD-AH5 (5xD) L2 Dm7
Solid Carbide Drills for Hard L L3 L4
Materials, Drilling Depth 5xD Dm7 dh6
Dimensions
IC903 SOLID CARBIDE DRILLS
Designation D L L3 d L4 L2 Th (1)
SCD 030-015-060 AH5 3.00 15.0 26.0 6.00 35.0 66.0 - •
SCD 033-017-060 AH5 3.30 16.5 26.0 6.00 35.0 66.0 M4 •
SCD 040-020-060 AH5 4.00 20.0 29.0 6.00 32.0 66.0 - •
SCD 042-021-060 AH5 4.20 21.0 32.0 6.00 46.0 82.0 M5 •
SCD 044-022-060 AH5 4.40 22.0 32.0 6.00 46.0 82.0 - •
SCD 045-023-060 AH5 4.50 22.5 32.0 6.00 46.0 82.0 - •
SCD 050-025-060 AH5 5.00 25.0 37.0 6.00 41.0 82.0 M6 •
SCD 053-027-060 AH5 5.30 26.5 39.0 6.00 37.0 82.0 - •
SCD 055-028-060 AH5 5.50 27.5 39.0 6.00 37.0 82.0 - •
SCD 060-030-060 AH5 6.00 30.0 43.0 6.00 37.0 82.0 M7 •
SCD 068-034-080 AH5 6.80 34.0 49.0 8.00 39.0 91.0 M8 •
SCD 070-035-080 AH5 7.00 35.0 49.0 8.00 39.0 91.0 - •
SCD 075-038-080 AH5 7.50 37.5 52.0 8.00 34.0 91.0 - •
SCD 078-039-080 AH5 7.80 42.0 55.0 8.00 34.0 91.0 M9 •
SCD 080-040-080 AH5 8.00 40.0 55.0 8.00 34.0 91.0 - •
SCD 085-043-100 AH5 8.50 42.5 59.0 10.00 46.0 112.0 M10 •
SCD 088-044-100 AH5 8.80 44.0 63.0 10.00 46.0 112.0 - •
SCD 090-045-100 AH5 9.00 45.0 63.0 10.00 46.0 112.0 - •
SCD 095-048-100 AH5 9.50 47.5 66.0 10.00 39.0 112.0 M11 •
SCD 100-050-100 AH5 10.00 50.0 70.0 10.00 39.0 112.0 - •
SCD 105-053-120 AH5 10.50 52.5 71.0 12.00 45.0 122.0 - •
SCD 110-055-120 AH5 11.00 55.0 74.0 12.00 45.0 122.0 - •
SCD 115-058-120 AH5 11.50 57.5 77.0 12.00 40.0 122.0 - •
• For user guide and cutting conditions, see page 581 • For regrinding instructions, see page 594
(1) Used for standard thread size
Recommended Machining Conditions for SCD...AH5 Solid Drills
Cutting Speed Feed vs. Drill Diameter (mm/rev)
ISO Material Hardness Material No. Vc (m/min) Ø3-5 Ø5.1-8 Ø8.1-12
Hardened steel 50-55 HRc 38 25-40 0.04-0.07 0.05-0.08 0.06-0.10
H Hardened steel 56-60 HRc 39 15-25 0.03-0.06 0.04-0.07 0.05-0.08
Hardened steel 61-70 HRc 39 10-15 0.02-0.04 0.03-0.05 0.03-0.05
Materials over 50 HRc must be used with external cooling while machining.
Use of semi-synthetic or emulsion with more than 6% oil concentration is highly
recommended to extend tool life and hole quality.
577