Page 397 - Iscar

W
ADKT 1505PDTR-76
Insert with 2 Helical Cutting Edges with l
Ribs Along Edge for Interrupted Cut ap Rd°
r
F r S

Recommended
Dimensions Tough 1 Hard
Machining Data MILLING INSERTS
IC330 IC328 IC830 IC928 IC950 IC910 IC520M ap fz
Designation W l S r F ap (mm) (mm/t)
ADKT 1505PDTR-76 9.54 15.75 5.63 1.00 1.60 13.90 • • • • • • • 5.00-12.00 0.08-0.15
• Reinforced helical cutting edge with ribs on rake face reducing heat transfer, for interrupted cuts and medium to heavy machining.
• For cutting speed recommendations, see pages 462-498
For tools, see pages: ADK (210) • E90AC (29) • F90AD-SFR (179) • HM90 E90AD-15 (25) • HM90 E90AD-CF-15 (25) • HM90 E90AD-M-15 (26)
• HM90 F90A-15 (178) • SM (219)

W
ADKT 1505..R/L-HM
Inserts with 2 Helical Cutting l
Edges and Various Corner ap Rd°
Radii for General Use
F r S
Recommended
Dimensions Tough 1 Hard
Machining Data

IC28 IC328 IC830 IC928 IC950 IC908 IC30N IC910 IC520M IC20 ap fz
Designation r W F l ap S (mm) (mm/t)
ADKT 150516R/L-HM (1) 1.60 9.57 1.37 15.60 13.85 5.60 • • • • • • • • 5.00-12.00 0.08-0.15
ADKT 150520R-HM 2.00 9.57 - 14.80 13.50 5.20 • 5.00-12.00 0.08-0.15
ADKT 150524R/L-HM (1) 2.50 9.57 0.52 15.60 13.80 5.60 • • • • 5.00-12.00 0.08-0.15
ADKT 150532R/L-HM (1) 3.20 9.57 - 15.50 13.70 5.60 • • • • • • • • • • 5.00-12.00 0.08-0.15
ADKT 150540R/L-HM (1) 4.00 9.57 - 15.40 13.65 5.60 • • 5.00-12.00 0.08-0.15
ADKT 150550R/L-HM (1) 5.00 9.57 - 15.10 13.50 5.30 • • • • 5.00-12.00 0.08-0.15
ADKT 150564R/L-HM (1) 6.20 9.57 - 14.80 13.20 5.30 • • • • 5.00-12.00 0.08-0.15
• Inserts with corner radii larger than 0.8 mm should be used on ADK & SM tools only on the face of the cutter.
• For cutting speed recommendations, see pages 462-498
(1) L - Left-hand inserts are used only for special tools.

For tools, see pages: ADK (210) • E90AC (29) • ETS (291) • F90AD-SFR (179) • FST (309) • HM90 E90AD-15 (25) • HM90 E90AD-CF-15 (25)
• HM90 E90AD-M-15 (26) • HM90 F90A-15 (178) • SM (219)

r R12.7
ADKT 1505-FF
Inserts for Fast Feed Milling l Rd°

ae S
W ap
Recommended
Dimensions Tough 1 Hard
Machining Data

IC330 IC928 IC808 ap fz
Designation W l ap ae S r (1) Rg (mm) (mm/t)
ADKT 1505R8T-FF 9.90 15.90 1.50 6.6 6.20 2.70 3.50 • • • 0.50-1.00 0.50-1.50
• The cutting diameter of the tool is 0.5 mm larger than the nominal diameter when using this insert. • Tool corner should be modified to 2.0 mm.
• At D.O.C. larger than apmax, regular insert feed should be applied.
(1) Radii for CNC programming is considered as 3.5 mm
For tools, see pages: F90AD-SFR (179) • HM90 E90AD-15 (25) • HM90 E90AD-CF-15 (25) • HM90 E90AD-M-15 (26) • HM90 F90A-15 (178)

393