Page 70 - Iscar

ENDMILLS • SOLID CARBIDE • MULTI-MASTER

MM S-D (89° conical shanks) D2 d
89° Conical Shanks for
Interchangeable Milling Heads a°
Tsi h
L1
L

Designation Tsi a° d D2 L1 L Shank m. h RPM max (2) kg
MM S-D-L100-C12-T05 T05 89 12.00 7.60 35.0 100.00 S 29.60 N 52000 0.080
MM S-D-L110-C12-T05-C T05 89 12.00 7.60 60.0 110.00 C 55.90 N 53430 0.126
MM S-D-L110-C12-T05-W-H T05 89 12.00 7.60 60.0 110.00 W 55.70 Y 38460 0.140
MM S-D-L130-C12-T05-C T05 89 12.00 7.60 80.0 130.00 C 77.30 N 36420 0.148
MM S-D-L130-C12-T05-W-H T05 89 12.00 7.60 80.0 130.00 W 76.40 Y 26160 0.164
MM S-D-L150-C16-T05-C T05 89 16.00 7.60 100.0 150.00 C 91.50 N 29700 0.275
MM S-D-L110-C12-T06-W-H T06 89 12.00 9.60 60.0 110.00 W 58.80 Y 36990 0.170
MM S-D-L130-C16-T06-W-H T06 89 16.00 9.60 80.0 130.00 W 73.40 Y 29490 0.285
MM S-D-L150-C16-T06-C T06 89 16.00 9.60 100.0 150.00 C 95.40 N 30150 0.272
MM S-D-L150-C16-T06-W-H T06 89 16.00 9.60 100.0 150.00 W 93.80 Y 21660 0.326
MM S-D-L160-C16-T06 T06 89 16.00 9.60 55.0 160.00 S 46.80 N 23370 0.120
MM S-D-L170-C16-T06-C T06 89 16.00 9.60 120.0 170.00 C 116.90 N 23400 0.110
MM S-D-L170-C16-T06-W T06 89 16.00 9.60 55.0 170.00 W 46.30 N 21210 0.484
MM S-D-L130-C16-T08-C T08 89 16.00 11.60 80.0 130.00 C 77.20 N 39870 0.282
MM S-D-L130-C16-T08-W-H T08 89 16.00 11.60 80.0 130.00 W 76.40 Y 29040 0.320
MM S-D-L150-C16-T08-C T08 89 16.00 11.60 100.0 150.00 C 97.80 N 29970 0.330
MM S-D-L150-C16-T08-W-H T08 89 16.00 11.60 100.0 150.00 W 98.30 Y 21540 0.384
MM S-D-L170-C20-T08 T08 89 20.00 11.60 80.0 170.00 S 69.70 N 22680 0.303
MM S-D-L170-C20-T08-C T08 89 20.00 11.60 120.0 170.00 C 112.00 N 26250 0.473
MM S-D-L170-C20-T08-W T08 89 20.00 11.60 80.0 170.00 W 69.70 N 24900 0.650
MM S-D-L170-C20-T08-W-H T08 89 20.00 11.60 120.0 170.00 W 113.10 Y 18750 0.526
MM S-D-L150-C20-T10-C T10 89 20.00 15.30 120.0 150.00 C 97.50 N 35610 0.525
MM S-D-L150-C20-T10-W-H T10 89 20.00 15.30 100.0 150.00 W 96.80 Y 25800 0.604
MM S-D-L170-C20-T10-C T10 89 20.00 15.30 120.0 170.00 C 118.30 N 28140 0.608
MM S-D-L170-C20-T10-W-H T10 89 20.00 15.30 120.0 170.00 W 118.00 Y 20100 0.726
MM S-D-L190-C20-T10 T10 89 20.00 15.30 80.0 190.00 S 73.70 N 15780 0.420
MM S-D-L190-C20-T10-C T10 89 20.00 15.30 140.0 190.00 C - N 22830 0.682
MM S-D-L190-C20-T10-W-H T10 89 20.00 15.30 140.0 190.00 W - Y 16170 0.832
MM S-D-L210-C20-T10-C T10 89 20.00 15.30 160.0 210.00 C - N 18270 0.754
MM S-D-L210-C20-T10-W-H T10 89 20.00 15.30 160.0 210.00 W - Y 12870 0.926
MM S-D-L180-C25-T12-C T12 89 25.00 18.30 120.0 180.00 C 115.70 N 29460 0.914
MM S-D-L180-C25-T12-W-H T12 89 25.00 18.30 120.0 180.00 W 114.60 Y 20940 1.154
MM S-D-L200-C25-T12-W-H T12 89 25.00 18.30 150.0 200.00 W 146.60 Y 16560 1.207
MM S-D-L210-C25-T12 T12 89 25.00 18.30 100.0 210.00 S 94.60 N 15540 0.656
MM S-D-L250-C25-T12-C T12 89 25.00 18.30 140.0 250.00 C 135.60 N 16170 1.396
MM S-D-L250-C25-160T12W-H T12 89 25.00 18.30 160.0 250.00 W 157.20 Y 11310 1.765
MM S-D-L250-C25-T12-W-H T12 89 25.00 18.30 140.0 250.00 W 135.60 Y 11300 1.800
MM S-D-L250-C32-T15 T15 89 32.00 23.90 100.0 250.00 S 90.10 N 14160 1.000
MM S-D-L250-C32-T15-C T15 89 32.00 23.90 150.0 250.00 C 143.30 N 20370 1.884
MM S-D-L300-C32-T15-C T15 89 32.00 23.90 200.0 300.00 C 195.70 N 16000 2.616
• Shank material (Shank m.): S-steel, C-carbide, W-tungsten. • Do not apply lubricant to the threaded connection.
(2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.
For tools, see pages: • MTE-MM (358)

66 ISCAR