Page 130 - CAMFIX

l

ADJ HSK A-ER
DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) 58-60 HRc √N5
and HSK DIN69893/A Tapered Shanks
L
L1
L5 G2.5
SS L3 Ref. 15,000 RPM

CSI min
D3 D1 d max 0.05 1°

D2
Designation SS CSI d min d max D1 D2 D3 L L1 L3 L5 Kg
ADJ HSK A 63 D70 ER32 63 ER32 2.0 20.0 70.0 46.00 50.00 134.50 108.5 52.50 92.50 2.25
ADJ HSK A 100 D70 ER32 100 ER32 2.0 20.0 70.0 46.00 50.00 129.50 100.5 52.50 82.50 3.64
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately). • Radial adjustment 0.1 mm. Angular adjustment 1°.
For spare parts, refer to ISCAR TOOLHOLDING SYSTEMS catalog

Angular Adjustment

Radial Adjustment

ADJ HSK A
FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Tapered Shank, for 58-60 HRc √N5
Specially Tailored Toolholders
L
L1 (1)
SS L3

d2 D1

D2
Designation SS L L1 L3 d2 D1 D2 Kg
ADJ HSK A 63 D70 63 60.00 34.0 18.00 35.00 70.0 46.00 1.24
ADJ HSK A 100 D70 100 55.00 26.0 - 35.00 70.0 - 2.63
• (1) Use 4 mm hex key for screw adjustment. • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
For spare parts, refer to ISCAR TOOLHOLDING SYSTEMS catalog

130 ISCAR