Page 128 - CAMFIX

l

HSK-C#
CAMFIX (ISO 26623-1) Holders with HSK DIN69893 Form A Tapered Shanks A 0.003 A 58-60 HRc

√N5
SS CSI

L5
L

Designation SS CSI L L5 Kg
C5 AD HSK A63WH X90 63 50 90.00 64.00 1.44
C6 AD HSK A100WH X110 100 63 110.00 81.00 3.61
C8 AD HSK A100WH X120 100 80 120.00 91.00 4.79
C8 AD HSK A125WH X130 125 80 130.00 101.00 6.50
• Note: To enable clamping the part to be attached, first remove the cooling tube

HSK A-MT
DIN 6383/DIN228-2 Form D Tang Morse Taper Adapters A 0.005 A 58-60 HRc
with DIN 69893/A HSK Tapered Shanks
Tt˚
√N5
SS D1

L1
L
Designation SS Tt° D1 L L1 Kg
HSK A 63 MT1X110 63 MT1 25.0 110.00 84.0 0.92
HSK A 63 MT2X120 63 MT2 32.0 120.00 94.0 1.09
HSK A 63 MT3X140 63 MT3 40.0 140.00 114.0 1.45
HSK A 63 MT4X160 63 MT4 48.0 160.00 134.0 1.89
HSK A 100 MT1X110 100 MT1 25.0 110.00 81.0 2.27
HSK A 100 MT2X120 100 MT2 32.0 120.00 91.0 2.39
HSK A 100 MT3X150 100 MT3 40.0 150.00 121.0 2.83
HSK A 100 MT4X170 100 MT4 48.0 170.00 141.0 3.31
HSK A 100 MT5X200 100 MT5 63.0 200.00 171.0 4.60
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
For spare parts, refer to ISCAR TOOLHOLDING SYSTEMS catalog

128 ISCAR