Page 904 - Iscar

BT MAS-403 BT-HYDRO (heavy duty) SS d2 D1 D3 G L SS L1 J L Lmax L min d2 D1 L max D3 J BT 40= 18,000 RPM 0.003 A 58-60 HRc

A
Lmin
Heavy Duty Short Hydraulic Chucks
G2.5
with MAS-BT Form ADB Shanks
BT 50= 12,000 RPM
U<1.0 gmm
L1
kg
Designation
G
BT40 HYDRO 20X72.5
72.50
20.00
40
49.50
40.00
M16X1
M16
1.43
45.5
52.0
62.0
52.0
BT50 HYDRO 32X90
72.00
90.00
65.0
M24
4.80
75.0
M16X1
56.00
32.00
50
• Chucking forces will be reduced by 25% if reduction sleeves are used. • Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (ordered
separately). • The coolant passages in the B type flange are blocked with screws which can be removed when required. • Clamping wrench (wrench HYDRO HEX
4) and test bar should be ordered separately.
993 965 978-979 846

SS L L1 A 0.005 A AT3 Taper
BT-EM (Short)
Short DIN6359 / DIN 1835 Form 58-60 HRc
B Weldon Endmill Holders with BT D1
MAS-403 AD Tapered Shanks d2
G
Designation SS d2 L L1 D1 G kg
BT40 EM 10X 45 40 10.00 45.00 18.0 35.00 M16 1.05 SR M10X12 DIN1835-B
BT40 EM 12X 45 40 12.00 45.00 18.0 42.00 M16 1.08 SR M12X16 DIN1835-B
BT40 EM 14X 45 40 14.00 45.00 18.0 44.00 M16 1.06 SR M12X16 DIN1835-B
BT40 EM 16X 45 40 16.00 45.00 18.0 48.00 M16 1.16 SR M14X16 DIN1835-B
BT40 EM 18X 45 40 18.00 45.00 18.0 50.00 M16 1.10 SR M14X16 DIN1835-B
BT40 EM 20X 45 40 20.00 45.00 18.0 52.00 M16 1.13 SR M16X10.3 EM SHORT
BT40 EM 25X 45 40 25.00 45.00 - 63.00 M16 1.12 SR M18X2X10 EM SHORT
• B is the designation for coolant through flange.
For tools, see pages: MTE D (359) • MTE D(Double Insert) (359)

978-979

900 ISCAR