Page 69 - logic

MM S-D (89° conical shanks) Performance
Engineered for
89° Conical Shanks for Interchangeable Milling Heads
MAXIMUM
MULTI-MASTER

D2 d

a°
Tsi h
L1
L

Designation Tsi a° d D2 L1 L Shank m. h Coolant RPM max (2) Kg
MM S-D-L100-C12-T05 T05 89 12.00 7.60 35.0 100.00 S 29.60 N 52000 0.15
MM S-D-L110-C12-T05-C T05 89 12.00 7.60 60.0 110.00 C 55.90 N 53430 0.13
MM S-D-L110-C12-T05-W-H T05 89 12.00 7.60 60.0 110.00 W 55.70 Y 38460 0.14
MM S-D-L130-C12-T05-C T05 89 12.00 7.60 80.0 130.00 C 77.30 N 36420 0.15
MM S-D-L130-C12-T05-W-H T05 89 12.00 7.60 80.0 130.00 W 76.40 Y 26160 0.16
MM S-D-L150-C16-T05-C T05 89 16.00 7.60 100.0 150.00 C 91.50 N 29700 0.17
MM S-D-L110-C12-T06-W-H T06 89 12.00 9.60 60.0 110.00 W 58.80 Y 36990 0.17
MM S-D-L130-C16-T06-W-H T06 89 16.00 9.60 80.0 130.00 W 73.40 Y 29490 0.29
MM S-D-L150-C16-T06-C T06 89 16.00 9.60 100.0 150.00 C 95.40 N 30150 0.11
MM S-D-L150-C16-T06-W-H T06 89 16.00 9.60 100.0 150.00 W 93.80 Y 21660 0.33
MM S-D-L160-C16-T06 T06 89 16.00 9.60 55.0 160.00 S 46.80 N 23370 0.12
MM S-D-L170-C16-T06-C T06 89 16.00 9.60 120.0 170.00 C 116.90 N 23400 0.11
MM S-D-L170-C16-T06-W T06 89 16.00 9.60 55.0 170.00 W 46.30 N 21210 0.48
MM S-D-L130-C16-T08-C T08 89 16.00 11.50 80.0 130.00 C 77.20 N 39870 0.28
MM S-D-L130-C16-T08-W-H T08 89 16.00 11.50 80.0 130.00 W 76.40 Y 29040 0.32
MM S-D-L150-C16-T08-C T08 89 16.00 11.50 100.0 150.00 C 97.80 N 29970 0.33
MM S-D-L150-C16-T08-W-H T08 89 16.00 11.50 100.0 150.00 W 98.30 Y 21540 0.38
MM S-D-L170-C20-T08 T08 89 20.00 11.50 80.0 170.00 S 69.70 N 22680 0.30
MM S-D-L170-C20-T08-C T08 89 20.00 11.50 120.0 170.00 C 112.00 N 26250 0.49
MM S-D-L170-C20-T08-W T08 89 20.00 11.50 80.0 170.00 W 69.70 N 24900 0.50
MM S-D-L170-C20-T08-W-H T08 89 20.00 11.50 120.0 170.00 W 113.10 Y 18750 0.53
MM S-D-L150-C20-T10-C T10 89 20.00 15.20 120.0 150.00 C 97.50 N 35610 0.55
MM S-D-L150-C20-T10-W-H T10 89 20.00 15.20 100.0 150.00 W 96.80 Y 25800 0.60
MM S-D-L170-C20-T10-C T10 89 20.00 15.20 120.0 170.00 C 118.30 N 28140 0.61
MM S-D-L170-C20-T10-W-H T10 89 20.00 15.20 120.0 170.00 W 118.00 Y 20100 0.73
MM S-D-L190-C20-T10 T10 89 20.00 15.20 80.0 190.00 S 73.70 N 15780 0.70
MM S-D-L190-C20-T10-C T10 89 20.00 15.20 140.0 190.00 C 140.00 N 22830 0.68
MM S-D-L190-C20-T10-W-H T10 89 20.00 15.20 140.0 190.00 W - Y 16170 0.83
MM S-D-L210-C20-T10-C T10 89 20.00 15.20 160.0 210.00 C 160.00 N 18270 0.75
MM S-D-L210-C20-T10-W-H T10 89 20.00 15.20 160.0 210.00 W - Y 12870 0.93
MM S-D-L180-C25-T12-C T12 89 25.00 18.30 120.0 180.00 C 115.70 N 29460 0.91
MM S-D-L180-C25-T12-W-H T12 89 25.00 18.30 120.0 180.00 W 114.60 Y 20940 1.15
MM S-D-L200-C25-T12-W-H T12 89 25.00 18.30 150.0 200.00 W 146.60 Y 16560 1.21
MM S-D-L210-C25-T12 T12 89 25.00 18.30 100.0 210.00 S 94.60 N 15540 1.20
MM S-D-L250-C25-T12-C T12 89 25.00 18.30 140.0 250.00 C 135.60 N 16170 1.40
MM S-D-L250-C25-160T12W-H T12 89 25.00 18.30 160.0 250.00 W 157.20 Y 11310 1.77
MM S-D-L250-C25-T12-W-H T12 89 25.00 18.30 140.0 250.00 W 135.60 Y 11300 1.80
MM S-D-L250-C32-T15 T15 89 32.00 23.90 100.0 250.00 S 90.10 N 14160 1.90
MM S-D-L250-C32-T15-C T15 89 32.00 23.90 150.0 250.00 C 143.30 N 20370 2.05
MM S-D-L300-C32-T15-C T15 89 32.00 23.90 200.0 300.00 C 195.70 N 16000 2.62
• Shank material (Shank m.): S-steel, C-carbide, W-tungsten. • Do not apply lubricant to the threaded connection.
(2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.

67