Page 68 - logic

MM S-A (straight shanks)
Shanks for Interchangeable Milling Heads

D2 d
Tsi L

D2 d
Tsi L

Designation Tsi d D2 Shank (2) L RPM max (3) Kg
MM S-A-L055-W12-T05 T05 12.00 7.60 W 55.00 60000 0.05
MM S-A-L065-W16-T06 T06 16.00 9.50 W 65.00 60000 0.11
MM S-A-L065-W16-T08 T08 16.00 11.50 W 65.00 60000 0.10
MM S-A-L070-W20-T10 T10 20.00 15.20 W 70.00 60000 0.18
MM S-A-L075-W25-T12 T12 25.00 18.30 W 75.00 60000 0.31
MM S-A-L100-W32-T15 T15 32.00 23.90 W 100.00 60000 0.30
MM S-A-L150-C12-T05-B (1) T05 12.00 7.60 C 150.00 18270 0.13
MM S-A-L200-C16-T06-B (1) T06 16.00 9.60 C 200.00 11970 0.45
MM S-A-L250-C20-T08-B (1) T08 20.00 11.50 C 250.00 9330 0.60
MM S-A-L250-C25-T10-B (1) T10 25.00 15.20 C 250.00 11130 0.94
• Do not apply lubricant to the threaded connection.
(1) "B" suffix - cylindrical shank which may be shortened. (2) C-Cylindrical, W-Weldon (3) The maximum RPM must be calculated. Divide the listed max. RPM by the
number of flutes (on the milling head) being used.

MM S-B (85° conical shanks)
85° Conical Shanks for Interchangeable Milling Heads

Tsi

D2 d

a°
h
L1
L

Designation Tsi a° d D2 Shank (1) L1 L Shank m. h RPM max (2) Kg
MM S-B-L080-C12-T05 T05 85 12.00 7.60 C 25.0 80.00 S - 60000 0.06
MM S-B-L125-C16-T06 T06 85 16.00 9.60 C 34.0 125.00 S 31.50 41280 0.26
MM S-B-L140-C20-T06-W T06 85 20.00 9.60 C 60.0 140.00 W - 51180 0.62
MM S-B-L140-C16-T08 T08 85 16.00 11.50 C 22.0 140.00 S 19.20 25590 0.22
MM S-B-L140-C20-T10 T10 85 20.00 15.20 C 27.5 140.00 S - 31020 0.34
MM S-B-L170-C25-T10 T10 85 25.00 15.20 C 56.0 170.00 S - 29490 0.16
MM S-B-L160-C25-T12 T12 85 25.00 18.30 C 40.0 160.00 S - 28680 0.11
MM S-B-L190-C32-T12 T12 85 32.00 18.30 C 80.0 190.00 S - 34890 0.56
MM S-B-L200-C32-T15 T15 85 32.00 23.90 C 50.0 200.00 S - 14160 0.30
MM S-B-L250-W40-T15 T15 85 40.00 23.90 W 100.0 250.00 S - 21840 2.54
• Shank material (Shank m.): S-steel, W-tungsten. • Do not apply lubricant to the threaded connection.
(1) C-Cylindrical, W-Weldon (2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used.

66 ISCAR