Page 49 - logic

MM HC Performance
Engineered for
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes
MAXIMUM
Rd°
MULTI-MASTER
D2
Ts

Dh9
Ha°
r ap
l
ECONOMICAL SOLUTION
Recommended
Dimensions Tough Ö Hard
Machining Data

IC908 IC903 fz
Designation D Flute ap r Ts D2 l Ha° Tm (1) (mm/t)
MM HC078C08R0.2-2T05 7.80 2 7.70 0.20 T05 7.60 10.00 10.0 r0-2.0 l 0.03-0.09
MM HC080C08R0.4-2T05 8.00 2 7.70 0.40 T05 7.60 10.00 10.0 r0-2.0 l l 0.03-0.09
MM HC080C08R1.0-2T05 8.00 2 7.70 1.00 T05 7.60 10.00 10.0 r0-2.0 l l 0.03-0.09
MM HC080C08R2.0-2T05 8.00 2 7.70 2.00 T05 7.60 10.00 10.0 r0-2.0 l l 0.03-0.09
MM HC098C10R0.3-2T06 9.80 2 9.00 0.30 T06 9.60 12.35 10.0 r0-3.0 l 0.03-0.10
MM HC100C10R0.4-2T06 10.00 2 9.00 0.40 T06 9.60 12.35 10.0 r0-3.0 l l 0.03-0.10
MM HC100C10R1.0-2T06 10.00 2 9.00 1.00 T06 9.60 12.35 10.0 r0-3.0 l l 0.03-0.10
MM HC100C10R2.0-2T06 10.00 2 9.00 2.00 T06 9.60 12.35 10.0 r0-3.0 l l 0.03-0.10
MM HC117C13R0.3-2T08 11.70 2 10.00 0.30 T08 11.50 14.20 10.0 r0-3.0 l 0.04-0.11
MM HC120C13R0.4-2T08 12.00 2 10.00 0.40 T08 11.50 14.20 10.0 r0-3.0 l l 0.04-0.11
MM HC120C13R1.0-2T08 12.00 2 10.00 1.00 T08 11.50 14.20 10.0 r0-3.0 l l 0.04-0.11
MM HC120C13R2.0-2T08 12.00 2 10.00 2.00 T08 11.50 14.20 10.0 r0-3.0 l l 0.04-0.11
MM HC.500C55R016-2T08 12.70 2 11.00 0.40 T08 11.50 15.25 10.0 r0-3.2 l 0.04-0.11
MM HC140C11R0.4-2T08 14.00 2 11.60 0.40 T08 11.50 15.05 10.0 r0-4.0 l 0.04-0.12
MM HC157C16R0.3-2T10 15.70 2 15.00 0.30 T10 15.20 19.05 10.0 r0-4.0 l 0.05-0.13
MM HC160C16R0.4-2T10 16.00 2 14.90 0.40 T10 15.20 19.05 10.0 r0-4.0 l l 0.05-0.13
MM HC160C16R0.8-2T10 16.00 2 14.90 0.80 T10 15.15 19.05 10.0 r0-4.0 l l 0.05-0.13
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.
(1) Specially tailored radius range, available upon request.

47