Page 41 - logic

FOR INTERNAL USE ONL Y • SUBJECT TO CHANGE FOR INTERNAL USE ONL Y • SUBJECT TO CHANGE

CUTDIA OAL
THMPR/L D22-JHP CNT (typx3) H Bar Max
Holders with High Pressure HF HBH
Coolant Channels for Pentagonal HBL
SELF-GRIP Adapters
WF B

Designation H HF HBH B WF CUTDIA OAL HBL CNT
THMPR/L 16-D22-JHP 16.0 16.1 10.0 16.0 14.60 22.0 135.00 29.6 UNF 5/16-24
THMPR/L 20-D22-JHP 20.0 20.1 6.0 20.0 18.60 22.0 135.00 29.6 G1/8

Spare Parts

Designation
THMPL 16-D22-JHP SR 5/16UNF TL360 HW 5/32" SR M4X8 DIN912 HW 3.0
THMPR 16-D22-JHP SR 5/16UNF TL360 HW 5/32" SR M4X8 DIN912 HW 3.0
THMPL 20-D22-JHP PLG 1/8BSP TL360 HW 5.0 SR M4X8 DIN912 HW 3.0
THMPR 20-D22-JHP PLG 1/8BSP TL360 HW 5.0 SR M4X8 DIN912 HW 3.0

CUTDIA
ADMP D22 D
Parting and Grooving Adapters With
5 Pockets for SELF-GRIP Inserts
CW WB

Designation CW WB D CUTDIA Insert
ADMP D22-0.8 0.80 0.70 32 22.0 GFT 0.8 ESG-SLM*
ADMP D22-1.0 1.00 0.90 32 22.0 GFT 1.0 ESG-SLM*
ADMP D22-1.2 1.20 1.06 32 22.0 GFT 1.2 ESG-SLM*
ADMP D22-1.6 1.60 1.20 32 22.0 GFT 1.6 ESG-SLM*
* Optional, should be ordered separately

GFT-J
Thin Parting, Grooving & Slitting
Single-Ended Inserts for Soft Materials
CW
RE
Recommended
Dimensions Tough 1 Hard
Machining Data
IC1028 IC1008 f groove
Designation CW RE (mm/rev)
GFT 0.8J-0.1 0.80 0.10 • • 0.03-0.08
GFT 1.0J-0.1 1.00 0.10 • • 0.03-0.10
GFT 1.2J-0.14 1.20 0.14 • • 0.03-0.10
GFT 1.6J-0.16 1.60 0.16 • • 0.03-0.12

CUTDIA OAL CNT (typx3)
THMPR/L D45-JHP HF H Bar Max
Holders with High Pressure HBH
Coolant Channels for Pentagonal HBL
TANG-GRIP Adapters WF B

Designation H HF HBH B WF CUTDIA OAL HBL CNT
THMPR/L 20-D45-JHP 20.0 20.1 18.0 20.0 17.35 45.0 135.00 35.6 G1/8 SR M3X8DIN912 HW 2.5 PLG 1/8BSP TL360 HW 5.0
THMPR/L 25-D45-JHP 25.0 25.1 13.0 25.0 22.35 45.0 135.00 35.6 G1/8 SR M3X8DIN912 HW 2.5 PLG 1/8BSP TL360 HW 5.0

CUTDIA
ADMP D45 D
Parting and Grooving Adapters
With 5 Pockets for TANG-GRIP
Tangentially Clamped Inserts
CW WB

Designation CWN (1) CWX (2) WB D CUTDIA Insert
ADMP D45-2.0 1.80 2.40 1.60 42 45.0 TAG 2 ETG 2*
ADMP D45-3.0 2.80 3.50 2.50 42 45.0 TAG 3 ETG 3-4-SH*
* Optional, should be ordered separately (1) Cutting width minimum (2) Cutting width maximum

41