Page 103 - logic

FOR INTERNAL USE ONL Y • SUBJECT TO CHANGE FOR INTERNAL USE ONL Y • SUBJECT TO CHANGE

OAL LF CW
DGSM-M-JHP THSZMS CDX
Grooving and Slitting Small
Diameter Cutters with FLEXFIT DCONMS DC
Threaded Adaptation
DRVS
Designation DC CW CDX DCONMS THSZMS LF OAL DRVS (1)
DGSM 16-2-M06-3Z-JHP 16.00 2.00 2.20 9.80 M06 12.00 29.50 8.0
DGSM 16-3-M06-3Z-JHP 16.00 3.00 2.20 9.80 M06 12.00 29.50 8.0
DGSM 18-2-M06-3Z-JHP 18.00 2.00 3.20 9.80 M06 12.00 29.50 8.0
DGSM 18-3-M06-3Z-JHP 18.00 3.00 3.20 9.80 M06 12.00 29.50 8.0
DGSM 22-2-M08-3Z-JHP 22.00 2.00 4.80 13.00 M08 12.00 29.50 9.6
DGSM 22-3-M08-3Z-JHP 22.00 3.00 4.80 13.00 M08 12.00 29.50 9.6
• For inserts: DGM-V
(1) Key flat size

OAL LF CW
DGSM-MM-JHP THSZMS CDX
Grooving and Slitting Small
Diameter Cutters with MULTI- DCONMS DC
MASTER Threaded Adaptation
DRVS
Designation DC CW CDX DCONMS THSZMS LF OAL DRVS (1)
DGSM 16-2-M06-3Z-JHP 16.00 2.00 2.20 9.60 T06 9.15 15.80 8.0
DGSM 16-3-MMT06-3Z-JHP 16.00 3.00 2.20 9.60 T06 9.15 15.80 8.0
DGSM 18-2-MMT06-3Z-JHP 18.00 2.00 3.20 9.60 T06 9.15 15.80 8.0
DGSM 18-3-MMT06-3Z-JHP 18.00 3.00 3.20 9.60 T06 9.15 15.80 8.0
DGSM 22-2-MMT08-4Z-JHP 22.00 2.00 4.80 11.50 T08 9.15 21.80 10.0
DGSM 22-3-MMT08-4Z-JHP 22.00 3.00 4.80 11.50 T08 9.15 21.80 10.0
• For inserts: DGM-V
(1) Key flat size

INSL
DGM-V
Small Double-Sided Inserts with
Ridged Positive Chipformer RE
for Slitting and Grooving of CW
Wide Range of Materials
Recommended
Dimensions
Machining Data

IC1008 f groove
Designation CW RE INSL (mm/t)
DGM 2002V 2.00 0.20 6.20 • 0.03-0.10
DGM 3002V 3.00 0.20 6.20 • 0.04-0.15

103