Page 927 - Iscar

Lmax A 0.003 A 58-60 HRc
4° Lmin
dh6 D2

ST-SRK d5 d2
Thermal Chuck Collets with L1
Cylindrical Shanks L
Designation d2 d D2 d5 L L1 L min L max kg
ST 12X160 SRK 3 3.00 12.00 10.00 4.0 160.00 14.8 10.0 - 0.10 Straight & VDI Shanks
ST 16X160 SRK 3 3.00 16.00 10.00 6.0 160.00 43.4 10.0 - 0.20
ST 12X160 SRK 4 4.00 12.00 10.00 4.0 160.00 14.8 12.0 27.0 0.12
ST 16X160 SRK 4 4.00 16.00 10.00 6.0 160.00 43.4 12.0 - 0.20
ST 16X160 SRK 5 5.00 16.00 10.00 6.0 160.00 43.4 15.0 - 0.20
ST 20X200 SRK 5 5.00 20.00 10.00 6.0 200.00 72.0 15.0 - 0.38
ST 16X160 SRK 6 6.00 16.00 11.00 6.0 160.00 36.6 18.0 35.0 0.19
ST 20X200 SRK 6 6.00 20.00 11.00 6.0 200.00 65.2 18.0 40.0 0.30
ST 25X200 SRK 6 6.00 25.00 11.00 8.0 200.00 100.9 18.0 35.0 0.51
ST 20X200 SRK 8 8.00 20.00 14.00 6.0 200.00 43.3 25.0 40.0 0.43
ST 25X200 SRK 8 8.00 25.00 14.00 8.0 200.00 79.0 25.0 40.0 0.58
ST 25X200 SRK10 10.00 25.00 16.00 8.0 200.00 64.3 30.0 50.0 0.61
ST 25X200 SRK12 12.00 25.00 20.00 8.0 200.00 35.5 32.0 52.0 0.63
• To be used for carbide tools only.

956-957

Lmax Lmin 58-60 HRc
DIN69880-HYDRO
Hydraulic Chucks with VDI Shanks d d2 D1 D3 A 0.005 A
D2
L1
L2 L

Designation SS D1 D3 D2 d2 L2 L L1 L min L max kg
DIN69880 30 HYDRO 20X89 VDI30 38.00 42.00 68.00 20.00 55.00 95.00 73.0 48.0 85.0 1.24
DIN69880 30 HYDRO 25X100 VDI30 46.00 50.00 68.00 25.00 55.00 100.00 84.0 54.0 85.0 1.20
DIN69880 30 HYDRO 32X100 VDI30 56.00 60.00 68.00 32.00 55.00 100.00 84.0 58.0 90.0 1.20
DIN69880 40 HYDRO 20X95 VDI40 38.00 42.00 83.00 20.00 63.00 95.00 73.0 48.0 130.0 1.20
DIN69880 40 HYDRO 25X95 VDI40 46.00 50.00 83.00 25.00 63.00 95.00 73.0 54.0 130.0 2.14
DIN69880 40 HYDRO 32X95 VDI40 56.00 60.00 83.00 32.00 63.00 95.00 73.0 58.0 90.0 2.00
• Chucking forces will be reduced by 25% if reduction sleeves are used. • Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (ordered
separately). • Clamping wrench (wrench HYDRO HEX 4) and test bar should be ordered separately.

996 965 846

923