Page 484 - Iscar

INDEXABLE DRILLS DCN A-8D D min (1) D max 48.0 12.00 L L1 16.00 62.0 45.0 Po. Size K DCN 6-9.99-Y
L4
Indexable Head Drills with
Coolant Holes and One Flat
Dk7
dh6 D3
Shank, Drilling Depth 8xD

Designation
L
d
L4
L1
D3
DCN 060-048-12A-8D
6.00
6.40
6.0
45.0
6.5
DCN 065-052-12A-8D
6.90
52.0
6.50
16.00
66.3
K DCN 6-9.99-Y
12.00
K DCN 6-9.99
12.00
70.6
DCN 070-056-12A-8D
16.00
7.40
7.00
56.0
45.0
7.0
7.90
74.6
60.0
DCN 075-060-12A-8D
12.00
45.0
K DCN 6-9.99
7.50
16.00
7.0
16.00
DCN 080-064-12A-8D
8.00
K DCN 6-9.99
12.00
79.4
45.0
64.0
8.0
8.40
8.90
K DCN 6-9.99
83.4
DCN 085-068-12A-8D
8.50
8.0
72.0
12.00
45.0
K DCN 6-9.99
9.0
DCN 090-072-12A-8D
87.8
9.00
9.40
16.00
DCN 095-076-12A-8D
K DCN 6-9.99
9.0
91.8
16.00
45.0
12.00
9.90
76.0
9.50
DCN 100-080-16A-8D
16.00
48.0
20.00
80.0
96.2
DCN 105-084-16A-8D 10.00 10.40 68.0 12.00 16.00 100.2 45.0 10.0 K DCN 10-13.99
10.0
48.0
K DCN 10-13.99
10.50
10.90
16.00
20.00
84.0
DCN 110-088-16A-8D 11.00 11.40 88.0 16.00 20.00 104.6 48.0 11.0 K DCN 10-13.99
DCN 115-092-16A-8D 11.50 11.90 92.0 16.00 20.00 108.6 48.0 11.0 K DCN 10-13.99
DCN 120-096-16A-8D 12.00 12.40 96.0 16.00 20.00 113.0 48.0 12.0 K DCN 10-13.99
DCN 125-100-16A-8D 12.50 12.90 100.0 16.00 20.00 117.0 48.0 12.0 K DCN 10-13.99
DCN 130-104-16A-8D 13.00 13.40 104.0 16.00 20.00 121.6 48.0 13.0 K DCN 10-13.99
DCN 135-108-16A-8D 13.50 13.90 108.0 16.00 20.00 125.6 48.0 13.0 K DCN 10-13.99
DCN 140-112-16A-8D 14.00 14.40 112.0 16.00 20.00 132.1 48.0 14.0 K DCN 14-17.99
DCN 145-116-16A-8D 14.50 14.90 116.0 16.00 20.00 136.2 48.0 14.0 K DCN 14-17.99
DCN 150-120-20A-8D 15.00 15.90 120.0 20.00 25.00 143.7 50.0 15.0 K DCN 14-17.99
DCN 160-128-20A-8D 16.00 16.90 128.0 20.00 25.00 153.3 50.0 16.0 K DCN 14-17.99
DCN 170-136-20A-8D 17.00 17.90 136.0 20.00 25.00 162.9 50.0 17.0 K DCN 14-17.99
DCN 180-144-25A-8D 18.00 18.90 144.0 25.00 32.00 172.5 56.0 18.0 K DCN 18-21.99
DCN 190-152-25A-8D 19.00 19.90 152.0 25.00 32.00 182.0 56.0 19.0 K DCN 18-21.99
DCN 200-160-25A-8D 20.00 20.90 160.0 25.00 32.00 191.6 56.0 20.0 K DCN 18-21.99
DCN 210-168-25A-8D 21.00 21.90 168.0 25.00 32.00 201.2 56.0 21.0 K DCN 18-21.99
DCN 220-176-25A-8D 22.00 22.90 176.0 25.00 32.00 210.8 56.0 22.0 K DCN 22-26.99
DCN 230-184-32A-8D 23.00 23.90 184.0 32.00 42.00 220.4 60.0 23.0 K DCN 22-26.99
DCN 240-192-32A-8D 24.00 24.90 192.0 32.00 42.00 230.0 60.0 24.0 K DCN 22-26.99
DCN 250-200-32A-8D 25.00 25.90 200.0 32.00 42.00 239.5 60.0 25.0 K DCN 22-26.99
DCN 260-208-32A-8D 26.00 26.90 208.0 32.00 42.00 249.3 60.0 26.0 K DCN 22-26.99
DCN 270-216-32A-8D 27.00 27.90 216.0 32.00 42.00 258.6 60.0 27.0 K DCN 27-32.99
DCN 280-224-32A-8D 28.00 28.90 224.0 32.00 42.00 268.2 60.0 28.0 K DCN 27-32.99
DCN 290-232-32A-8D 29.00 29.90 232.0 32.00 42.00 277.8 60.0 29.0 K DCN 27-32.99
DCN 300-240-32A-8D 30.00 30.90 240.0 32.00 42.00 287.4 60.0 30.0 K DCN 27-32.99
DCN 310-248-32A-8D 31.00 31.90 248.0 32.00 42.00 297.0 60.0 31.0 K DCN 27-32.99
DCN 320-256-32A-8D 32.00 32.90 256.0 32.00 42.00 306.5 60.0 32.0 K DCN 27-32.99
• Prior to using the 8xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill. It is not required if HCP drilling head is used
• For user guide and cutting conditions, see pages 490
(1) Do not mount smaller drilling heads other than the specified range of the drill body
For inserts, see pages: FCP (486) • HCP-IQ (483) • ICK (484) • ICK-2M (485) • ICM (484) • ICP (484) • ICP-2M (485) • ICG (487)

480 ISCAR