Page 310 - Iscar

USER GUIDE
SLOTTING CUTTERS

Inserts
LNHT 1106...HT inserts should be used if a straight groove or shoulder are needed.
When using the other inserts, the machined surface is grooved due to the butterfly insert shape.

Side Wall Flatness Depending on the Inserts Being Used
Number Side Half Side Tools
Designation of Cutting Flatness Side Flatness Application Axial Depth of Cut
Edges ap5 H (mm) ap=10 H (mm) ap (mm)
LNKX 1106... 4R+4L Flat 0.45 Double Face MIlling Stock=0-10

LNMT 1106... 4R+4L Flat 0.45 Stock=0-10
ap ap
HT insert - N (1) 2R+2L Flat Flat Stock=0-10

LNKX 1106... 4R Flat 0.45 Half side Milling Stock=0-10
LNMT 1106... 4R Flat 0.45 Stock=0-10
ap
HT insert-R (2) 4R Flat Flat Stock=0-10
LNKX 1106... 4L Flat 0.45 Half side milling Stock=0-10

LNMT 1106... 4L Flat 0.45 Stock=0-10
ap
HT insert - N (1) 2L Flat Flat Stock=0-10
(1) Use of 8 cutting edges (4R+4L) is possible only when ap≤5 mm, otherwise 4 cutting edges
(2R+2L) can be used

ap-7
7
ap

Configuration Guide for Full Slot FDN/SDN... CALN11 Cutters
Number of Bottom Slot Insert Radius Half Side Tools Axial
Designation Application
Cutting Edges Flatness H (mm) R (mm) Depth of Cut W (mm)
LNHT 1106...
LNKX 1106... 2R+2L 0.45 0.8 W=14-19.5
LNMT 1106... 2R+2L 0.45 0.8 W=14-19.5
W
HT insert-N (1) 2R+2L Flat 0.8 W=14-19.5

R

W - 11.0 H
LNKX 1106... W
(1) LNHT insert - N LNMT 1106... (2) LNHT insert - R
R.H./L.H. R.H./L.H. R.H. only

ISCAR
306
306 ISCAR