Page 68 - CAMFIX

DGAD/HGAD
Adapters for Parting and Grooving, for DO-GRIP Double-Ended Inserts

DGAD, HGAD 1.4N/2N/3N Dmax DGAD 4N/5N/6N
Dmax
h1 B1 h1 B1

l1 W l1 A

W A A2
Designation W min W max A A2 B1 h1 l1 D max
DGAD 1.4N 1.40 1.40 3.20 1.0 30.0 24.0 41.50 28.0
DGAD 2N 1.90 (2) 2.50 3.20 1.6 30.0 24.0 41.50 32.0
DGAD 3N (1) 3.00 (2) 3.18 4.00 2.4 30.0 24.0 41.50 32.0
HGAD 3N 3.00 3.00 4.00 2.4 30.0 24.0 50.50 50.0
DGAD 4N 4.00 4.00 3.20 3.2 30.0 24.0 50.50 50.0
DGAD 5N 4.80 5.00 4.00 4.0 30.0 24.0 50.50 50.0
DGAD 6N 6.00 6.35 5.20 5.2 30.0 24.0 50.50 50.0
• DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified.
(1) Only the DGN/R/L inserts are suitable for this adapter (2) For 1 mm inserts, modify adapter
For inserts: DGN/DGNC/DGNM-C • HGN-C • DGR/L-C DGRC/LC-C • HGR/L-C • DGN/DGNM-J/JS/JT • HGN-J • DGR/L-J/JS • HGR/L-J/JS • DGN-P
• DGN-UT/UA • DGN-W • DGN-WP • DGN-Z • DGR-P • DGR-WP • DGR-Z/ZS • HGN-UT • GRIP • GRIP (full radius) .
For holders, see pages: C#-MAHD-JHP (11) • C#-MAHPD-JHP (13) • C#-MAHD (10) • C#-MAHPD (12) • C#-MAHUR/L (48) • C#-MAHDR-45 (47) •
C#-MAHDOR (48) • HSK A63WH-MAHUR/L (61) • HSK A63WH-MAHDR-45 (60) • HSK A63WH-MAHDOR (61)

Depth Capacity for DGN/R-1002J Insert on Standard Holders

Depth: T D max Depth: T D max
T
Up to 1.2 No limit Up to 2.2 32.3
1.3 830 2.3 29.3
1.4 218 2.4 26.7 Dmax
1.5 126 2.5 24.8
1.6 88.4 2.6 23.2
1.7 68.2 2.7 21.7
1.8 55.6 2.8 20.5
1.9 46.9 2.9 19.4
2.0 40.7 3.0 18.4
2.1 36.0
Standard Holders
Modification
To achieve no limitation on the workpiece diameter up to 3 mm
depth, the steel support under the insert should be ground, as Cutting Edge
per the shown sketch.
0.6 3.3

Spare Parts
Designation Extractor
DGAD 1.4N EDG 23B*
DGAD 2N EDG 33A*
DGAD 3N EDG 33A*
HGAD 3N EDG 23B*
DGAD 4N EDG 33A*
DGAD 5N EDG 33A*
DGAD 6N EDG 33A*
* Optional, should be ordered separately

68 ISCAR