Page 62 - CAMFIX

HSK A63WH-ASHN-45
Square Shank Tool Adapters with HSK Exchangeable Shanks for
45° Mounting on Turn-Mill Machines
Bar Max
L 90
45° h
35
SS
70
L2 b
50
Rigth-hand shown
Designation SS L L2 h b
HSK A63WH-ASHN-25-45 63 110.00 72.00 25.0 25.0
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately). • For using left-hand toolholder, the position of clamping
spacer must be changed. • Complies with the HSK-T and ICTM standards.

Spare Parts
Designation Screw Screw 1 Coolant Nozzle
HSK A63WH-ASHN-25-45 SR M10X25DIN912 12.9 SR M8X20X1.25DIN916 45H SATZ-M12X1-M6

HSK A63WH-ASHR/L-45
Square Shank Tool Adapters with HSK-T Exchangeable Shanks for
45° Mounting on Turn-Mill Machines

Bar Max
L h 33
L2
38
SS 15
45° 41.6
100
A left-hand tool in a right-hand
adapter are shown
Designation SS L L2 L3 h
HSK A63WH-ASHR/L-25-45 63 110.00 70.00 30.00 25.0
• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately). • Complies with the HSK-T and ICTM standards.

Spare Parts
Designation Screw Coolant Nozzle
HSK A63WH-ASHR/L-45 SR M12X30 DIN915 45H EZ 104

Coolant Nozzle Adjustment Instructions
In order to adjust the coolant nozzle and/or redirect the coolant,
follow these steps:
• Open the nut by turning it approximately three-quarters of a turn
counterclockwise.
• Adjust the coolant nozzle so it will direct the coolant to the area of the
cutting edge.
• Close the nut by turning it approximately three-quarters of a turn clockwise.
• The special (WRENCH NOZZLE HP) key should be used.

62 ISCAR