Page 58 - CAMFIX

HSK A63WH-ASHR/L-3
Triple Square Shank Tool Adapters with HSK Exchangeable Shanks for 45° Mounting
on Turn-Mill Machines
Bar Max
b h
L2
45
SS
f
100

L
Left-hand shown
Designation SS L L2 F h b
HSK A63WH-ASHR/L-25-3 63 125.00 90.00 45.0 25.0 25.0
• Complies with the HSK-T and ICTM standards. • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).

Spare Parts
Designation Screw Coolant Nozzle
HSK A63WH-ASHR/L-3 SR M12X30 DIN915 45H EZ 83

HSK A-WH ABB
Adapters with HSK Exchangeable Shanks for Boring Bars with Reduction Sleeves

Bar Max
M12 Typ 2

D1 d2 SS

L4 L5
L

Designation SS d2 L ٬L5 D1 L4
HSK A63WH-ABB-40 63 40.00 105.00 30.00 75.0 71.0
HSK A100WH-ABB-40 100 40.00 115.00 34.00 82.0 71.0
HSK A100WH-ABB-50 100 50.00 125.00 34.00 92.0 83.0
• Complies with the HSK-T (ISO 12164-3) and ICTM standards. • A cooling tube must be used with all coolant through HSK spindles (should be ordered
separately). • For SC reduction sleeves, see next page.

Coolant Nozzle Adjustment Instructions:
In order to adjust the coolant nozzle and/or redirect the coolant, follow these steps:
• Open the nut by turning it approximately three-quarters of a turn counterclockwise.
• Adjust the coolant nozzle so it will direct the coolant to the area of the cutting edge.
• Close the nut by turning it approximately three-quarters of a turn clockwise.
• The special (WRENCH NOZZLE HP M12) key should be used.

Spare Parts
Designation Screw Screw 1 Key Screw 2 Coolant Nozzle Wrench
WRENCH NOZZLE
HSK A-WH ABB SR M12X16 DIN1835-B SR M12X30 DIN915 45H (1) HW 6.0* SR M10X6DIN913 SATZ-M12X1-M6
HP M12*
* Optional, should be ordered separately
(1) Used on B type sleeves

58 ISCAR