Page 62 - logic

MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Rd°
Different Helix for Machining Aluminum

l Ts
r ap

Dh6 D2

Haº
ALUMINUM
Recommended
Dimensions
Machining Data
IC08 fz
Designation D Flute ap r Ts D2 l Ha° (mm/t)
MM EA080H08R0CF-4T05 08 8.00 4 8.00 0.00 T05 7.70 15.00 40.0 l 0.03-0.09
MM EA100H10R0CF-4T06 10.00 4 10.00 0.00 T06 9.60 19.00 40.0 l 0.03-0.10
MM EA120H12R0.2CF-3T08 08 12.00 3 12.00 0.20 T08 11.70 23.00 40.0 l 0.04-0.11
MM EA120H12R0CF-4T08 08 12.00 4 12.00 0.00 T08 11.70 23.00 40.0 l 0.04-0.11
MM EA160H16R0.0CF-3T10 16.00 3 16.00 0.00 T10 15.30 28.00 40.0 l 0.05-0.13
MM EA160H16R0.2CF-3T10 16.00 3 16.00 0.20 T10 15.30 28.00 40.0 l 0.05-0.13
MM EA160H16R0.5CF-3T10 16.00 3 16.00 0.50 T10 15.30 28.00 40.0 l 0.05-0.13
MM EA160H16R2.5CF-3T10 16.00 3 16.00 2.50 T10 15.30 28.00 40.0 l 0.05-0.13
MM EA160H16R0CF-4T10 16.00 4 16.00 0.00 T10 15.30 26.00 40.0 l 0.05-0.12
MM EA200H20R0.0CF-3T12 20.00 3 20.00 0.00 T12 18.30 34.00 40.0 l 0.05-0.13
MM EA200H20R0.2CF-3T12 20.00 3 20.00 0.20 T12 18.30 34.00 40.0 l 0.05-0.13
MM EA200H20R0.5CF-3T12 20.00 3 20.00 0.50 T12 18.30 34.00 40.0 l 0.05-0.13
MM EA200H20R2.5CF-3T12 20.00 3 20.00 2.50 T12 18.30 34.00 40.0 l 0.05-0.13
MM EA250H19R0.5-3T15 25.00 3 19.00 0.50 T15 23.90 37.00 40.0 l 0.06-0.16
MM EA250H19R1.0-3T15 25.00 3 19.00 1.00 T15 23.90 37.00 40.0 l 0.06-0.16
MM EA250H19R3.0-3T15 25.00 3 19.00 3.00 T15 23.90 37.00 40.0 l 0.06-0.16
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.

Spare Parts
Designation Wrench
MM EA-CF MM KEY 6X4*
* (Optional, should be ordered separately)

MM EPNC
Interchangeable Solid Endmills with Changing Directions
Helix Flutes, for Rough Machining of CFRP Parts

l
ap Ts

D D2

Recommended
Dimensions
Machining Data
fz
Designation D Flute ap r Ts D2 l IC02 (mm/t)
MM EPNC100S12-12T06 10.00 12 12.00 0.00 T06 9.60 19.00 l 0.02-0.04
MM EPNC120S14-12T08 12.00 12 14.00 0.00 T08 11.70 23.00 l 0.02-0.04
• For shanks, see pages 63-71 • For Clamping keys (should be ordered separately), tightening torques and clamping instructions, see page 8. • Do not apply
lubricant to the threaded connection. • For user guide, see pages 72-84.
Spare Parts
Designation Wrench
MM EPNC MM KEY 8X5*
* (Optional, should be ordered separately)

60 ISCAR