Page 937 - Iscar

L2 L (1) 58-60 HRc
ADJ ST
FINEFIT Center Alignment
Shank and Base with Cylindrical SS d2 D1
Shanks with a Clamping Flat

Designation SS L L2 D1 d2
ADJ ST25 D70 25 20.00 80.00 70.00 35.00 SR M8X1X16 DIN916
ADJ ST32 D70 32 20.00 80.00 70.00 35.00 SR M8X1X16 DIN916
• (1) Use 4 mm hex key for screw adjustment. Center Alignment Devices

L L1 58-60 HRc
ADJ HSK A SS L3 (1)
FINEFIT Center Alignment Shank and
Base with a DIN69893 HSK Tapered d2 D1
Shank for Specially Tailored Toolholders
D2
Designation SS L L1 L3 d2 D1 D2 kg
ADJ HSK A 63 D70 63 60.00 34.0 18.00 35.00 70.00 46.00 1.24 SR M8X1X16 DIN916
ADJ HSK A 100 D70 100 55.00 26.0 - 35.00 70.00 - 2.63 SR M8X1X16 DIN916
• (1) Use 4 mm hex key for screw adjustment. • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).

L L1 AT3 Taper 58-60 HRc
ADJ DIN69871 SS L3 (1)
FINEFIT Center Alignment Shank and
Base with a DIN 69871 Form AD Taper d2 D1 0.05 1°
Shank for Specially Tailored Toolholders G D2

Designation SS d2 L L1 L3 D1 D2 G kg
ADJ DIN69871 40 D70 40 35.00 50.00 30.9 15.00 70.00 46.00 M16 1.28
ADJ DIN69871 50 D70 50 35.00 50.00 30.9 - 70.00 - M24 3.32
• (1) Use 4 mm hex key for screw adjustment.

997

L AT3 Taper 58-60 HRc
ADJ BT SS L1 L3 (1)
Center Alignment Shanks and
Bases with BT MAS-403 ADB
Tapered Shanks for Specially d2 D2 D1
Tailored Toolholders
G

Designation SS L L1 L3 D1 d2 D2 G kg
ADJ BT40 D70 40 55.00 28.0 18.00 70.00 35.00 62.50 M16 1.56
ADJ BT50 D70 50 70.00 32.0 - 70.00 35.00 - M24 4.34
• (1) Use 4 mm hex key for screw adjustment. • Add B to the designation for coolant through flange option.

997

933