Page 59 - Iscar

D2 Rd°
MM HC Ts
Interchangeable Solid Carbide Slot Drill Dh9
Milling Heads with Two 10° Helix Flutes Ha°
r ap
l ECONOMICAL SOLUTION
Recommended
Dimensions Tough 1 Hard
Machining Data
IC908 IC903 fz
Designation D Flute ap r Ts D2 l Ha° Tm (1) (mm/t)
MM HC078C08R0.2-2T05 7.80 2 7.70 0.20 T05 7.60 10.00 10.0 r0-2.0 • 0.03-0.09
MM HC080C08R0.4-2T05 8.00 2 7.70 0.40 T05 7.60 10.00 10.0 r0-2.0 • • 0.03-0.09
MM HC080C08R1.0-2T05 8.00 2 7.70 1.00 T05 7.60 10.00 10.0 r0-2.0 • • 0.03-0.09
MM HC080C08R2.0-2T05 8.00 2 7.70 2.00 T05 7.60 10.00 10.0 r0-2.0 • • 0.03-0.09
MM HC098C10R0.3-2T06 9.80 2 9.00 0.30 T06 9.60 12.35 10.0 r0-3.0 • 0.03-0.10
MM HC100C10R0.4-2T06 10.00 2 9.00 0.40 T06 9.60 12.35 10.0 r0-3.0 • • 0.03-0.10
MM HC100C10R1.0-2T06 10.00 2 9.00 1.00 T06 9.60 12.35 10.0 r0-3.0 • • 0.03-0.10
MM HC100C10R2.0-2T06 10.00 2 9.00 2.00 T06 9.60 12.35 10.0 r0-3.0 • • 0.03-0.10
MM HC117C13R0.3-2T08 11.70 2 10.00 0.30 T08 11.50 14.20 10.0 r0-3.0 • 0.04-0.11
MM HC120C13R0.4-2T08 12.00 2 10.00 0.40 T08 11.50 14.20 10.0 r0-3.0 • • 0.04-0.11 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM HC120C13R1.0-2T08 12.00 2 10.00 1.00 T08 11.50 14.20 10.0 r0-3.0 • • 0.04-0.11
MM HC120C13R2.0-2T08 12.00 2 10.00 2.00 T08 11.50 14.20 10.0 r0-3.0 • • 0.04-0.11
MM HC.500C55R016-2T08 12.70 2 11.00 0.40 T08 11.50 15.25 10.0 r0-3.2 • 0.04-0.11
MM HC140C11R0.4-2T08 14.00 2 11.60 0.40 T08 11.50 15.05 10.0 r0-4.0 • 0.04-0.12
MM HC157C16R0.3-2T10 15.70 2 15.00 0.30 T10 15.20 19.05 10.0 r0-4.0 • 0.05-0.13
MM HC160C16R0.4-2T10 16.00 2 14.90 0.40 T10 15.20 19.05 10.0 r0-4.0 • • 0.05-0.13
MM HC160C16R0.8-2T10 16.00 2 14.90 0.80 T10 15.15 19.05 10.0 r0-4.0 • • 0.05-0.13
• For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35 • Do not apply
lubricant to the threaded connection. • For user guide, see pages 38,147-151
(1) Specially tailored radius range, available upon request.

D2 Rd°
MM ECU Ts
Interchangeable 3 Flute Ha° Dh8
Undersized Solid Carbide Heads
for Keyways (DIN 6885)
r ap
l
Recommended
Dimensions
Machining Data
IC908 fz
Designation D Flute ap r Ts D2 l Ha° (mm/t)
MM ECU077E04R020-3T05 7.70 3 4.00 0.20 T05 7.70 10.00 38.0 • 0.03-0.08
MM ECU097E05R030-3T06 9.70 3 5.00 0.30 T06 9.60 13.00 38.0 • 0.03-0.09
MM ECU117E07R030-3T08 11.70 3 7.00 0.30 T08 11.50 16.50 38.0 • 0.03-0.10
MM ECU157E08R030-3T10 15.70 3 8.00 0.30 T10 15.30 20.50 38.0 • 0.04-0.12
MM ECU197E12R040-3T12 19.70 3 12.00 0.40 T12 18.45 25.50 38.0 • 0.05-0.13
• For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35
• Do not apply lubricant to the threaded connection. • For user guide, see pages 38,147-151

D2 Ts Rd°
MM EC-3
Interchangeable 3 Flute Solid Carbide De8
Endmill Heads with 45° Helix
r ap Ha°
l
Recommended
Dimensions
Machining Data
IC908 fz
Designation D Flute ap r Ts D2 l Ha° (mm/t)
MM EC080B05R000-3T05 8.00 3 5.00 0.00 T05 7.70 10.00 45.0 • 0.03-0.09
MM EC100B07R000-3T06 10.00 3 7.00 0.00 T06 9.60 13.00 45.0 • 0.03-0.10
MM EC100B12R000-3T06 10.00 3 12.00 0.00 T06 9.60 19.00 45.0 • 0.03-0.10
MM EC120B09R000-3T08I (1) 12.00 3 9.00 0.00 T08 11.70 16.50 45.0 • 0.04-0.11
MM EC120B09R000-3T08 12.00 3 9.00 0.00 T08 11.70 16.50 45.0 • 0.04-0.11
MM EC.500B37R000-3T08 12.70 3 9.50 0.00 T08 12.40 16.50 45.0 • 0.05-0.10
MM EC.500B37R015-3T08 12.70 3 9.50 0.40 T08 12.40 16.50 45.0 • 0.05-0.10
MM EC.500B37R031-3T08 12.70 3 9.50 0.80 T08 12.40 16.50 45.0 • 0.05-0.10
MM EC.500B37R062-3T08 12.70 3 9.50 1.60 T08 12.40 16.50 45.0 • 0.05-0.10
• For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35
• Do not apply lubricant to the threaded connection. • For user guide, see pages 38,147-151
(1) With coolant holes directed to each flute

55