Page 110 - CAMFIX

l

ADJ C-ER
FINEFIT Center Alignment Shank and Base with a CAMFIX Adaptation, 58-60 HRc √N5
for Specially Tailored Toolholders
L
L1 CSI
L3 Ref.
d min
max
SS D3 D1 0.05 1°

Designation SS CSI d min d max D1 D3 L L1 L3
ADJ C5 ER32 50 ER32 2.0 20.0 70.0 50.00 115.00 95.0 52.50
ADJ C6 ER32 63 ER32 2.0 20.0 70.0 50.00 111.50 89.5 52.50
• Radial adjustment 0.1 mm. Angular adjustment 1°.
For spare parts, refer to ISCAR TOOLHOLDING SYSTEMS catalog

Radial Adjustment
Angular Adjustment

l

C#-MB
MB Modular Boring System Connection with CAMFIX Exchangeable Shanks

Fig 1 Fig 2

SS CSI SS CSI D2

L1 L1
L L
Designation SS CSI L L1 D2 Kg Fig.
C4 MB32X42 40 MB32 42.00 22.0 - 0.30 1
C5 MB50X55 50 MB50 55.00 - - 0.80 1
C6 MB40X50 63 MB40 50.00 28.0 - 0.90 1
C6 MB40X120 63 MB40 120.00 98.0 44.00 1.50 2
C6 MB50X67 63 MB50 67.00 45.0 - 1.10 1
C6 MB50X120 63 MB50 120.00 98.0 54.00 1.90 2
C6 MB63X77 63 MB63 77.00 - - 1.80 1
C8 MB50X60 80 MB50 60.00 30.0 - 2.00 1
C8 MB50X120 80 MB50 120.00 90.0 54.00 2.80 2
C8 MB63X70 80 MB63 70.00 40.0 - 2.30 1
C8 MB63X150 80 MB63 150.00 120.0 67.00 4.00 2
C8 MB80X75 80 MB80 75.00 - - 2.60 1
C8 MB80X120 80 MB80 120.00 - - 4.30 1
C10 MB80X80 100 MB80 80.00 48.0 - 3.50 1
C10 MB110X120 100 MB110 120.00 88.0 - 5.00 1
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.

110 ISCAR